Protective film for SAMSUNG GALAXY A31 hydrogel for TPU glass screen 2 pieces

2X HYDROGEL FILM FOR SAMSUNG GALAXY A31 Hydrogel is the latest generation film that will provide your device with full protection. The most important product features:☑️ 99.9% transparency - the film surface makes it easier to use the phone☑️ very thin - thickness 0.13 mm☑️ high touch sensitivity☑️ oleophobic coating - dirt is not so visible☑️ absorbs impact energy - provides screen protection and reduces the risk of damage to the display during fall☑️ surface protection against scratches☑️ covers 95% of the display☑️ compatible with a case☑️ easy to install, and any small bubbles will disappear within 24 hours of application☑️ 2 pieces in a set ⏺ ANTISCRASHAbsorbs shocks and has a self-regeneration function. Scratches disappear on their own.The transparent film protects the entire surface of the screen from scratches and breakage.The film is more durable than regular 9H tempered glass. ⏹ INVISIBLEPrecisely cut, hardened rubber (hydrogel) film.Very thin and flexible, so it adheres perfectly even to curved smartphone screens.With the protective film, you will feel as if it were not on your phone. ⏺ VERY EASY INSTALLATIONThe adhesive is covered with tiny glass beads, thanks to which you can move the film on the surface before pressing it. HYDROGEL FILM INSTALLATION INSTRUCTIONS Start by thoroughly cleaning your phone's screen. Use the cloths to remove dust and fingerprints from the display.Use the provided foil by peeling off the cut-out portion and placing it on the screen to check the dimensions and preliminary positioning.Then remove the first bottom layer of the cut-out foil – break it in half (the side that was adhered to the sheet) and proceed to apply the foil carefully.Apply the foil and push any air bubbles outward. Repeat this step several times until all air bubbles are eliminated from the screen.For a curved display, press the edges of the foil around its entire circumference. You can repeat this step several times.Remove the top layer of the film – it is recommended to use the sticker from the kit.The final step is to gently press the film while wiping the display with the included cloth.The remaining air bubbles will absorb themselves within 24 hours. We recommend not overheating the phone or using a case for the first 2 hours, which will prevent the film from peeling off at the corners of the device. ⏹ PLEASANT TO THE TOUCHThe coating does not affect the operation of the device. Provides a very good tactile experience.The finger print effect is not visible thanks to the properties of the film. INCLUDED IN THE SET:✔ Hydrogel film 2x✔ Dust-absorber stickers (for removing dust from the screen) 2x✔ Wet cloth 2x✔ Application squeegee✔ Microfiber cloth 2x