CP2104 USB to TTL UART 6PIN Serial Converter Module Board

Built-in USB transceiver, no external circuit breaker required Built-in clock circuit, no external circuit breaker required. Built-in power-on reset circuit. Description: The CP2104 s high of integration, built-in USB2.0 full-speed function controller, USB transceiver, oscillator, and asynchronous serial data bus (UART), support modem full-featured signals, without any external USB devices. The CP2104 works similarly to other USB-UART switching circuits. The USB port of the PC is virtualized into a serial port through the driver to achieve the purpose of expansion. Feature: Built-in USB transceiver, no external circuit breaker required Built-in clock circuit, no external circuit breaker required. Built-in power-on reset circuit. The voltage regulation inside the product can output 3.3V voltage. Meet the requirements of the USB2.0 specification. The SUSPEND pin supports USB status suspension. The asynchronous serial data bus is compatible with all handshake and modulation regulator interface signals. The supported data formats are data bit 8, stop bits 1, 2, and check bits. Built-in 512-byte receive buffer and 512-byte transmit buffer. Support hardware or X-ONCelsiusX-OFF handshake. With self-recovering . In the event of an unexpected short circuit, it can effectively your downloader and computer USB port. With indicator light, the working status is clear at a . Supports both power supply outputs of 3.3V and 5V. Specification: PCB board size: 30.5mm*17mm PCB board color: Blue Chip: CP2104 Support OS: For 98 Celsius 2000 Celsius XP Celsius 7 Celsius 8 Celsius 10 For OS-9 For X- CE For 2.40 or higher version Package list: 1 * Module 1 * Wire Note: The actual product color may deviate from the photo due to light. There may be a slight deviation in the measurement of product