Ortofon Lead Hybrid Silver Terminals LW-800S Wire, High-Purity Wire, Rhodium-Plated []

Lead wires that transmit signals purely using high-purity, high-quality conductors. Conductor: Hybrid high-purity silver wire Terminals: Rhodium plated Terminals: Rhodium plated Lead wires that transmit signals purely using high-purity, high-quality conductors. The output voltage of an analog cartridge ranges widely from approximately 0.2mV to 5mV, but it remains extremely low. Therefore, it is crucial to use high-purity, high-quality conductors in the lead wires to ensure pure signal transmission. About a quarter of a century ago, during the dawn of the cable boom, Ortofon released the "7N-LW1" and "8N-LW10," which, due to their tremendous effect on sound quality, became groundbreaking products that not only extended beyond lead wires but also led to the increased purity and diversification of conductors in audio cables as a whole. The current LW series, which succeeds these products, offers a total of four models, including the LW-800S, which uses three Φ0.26mm pure silver wires and sixteen Φ0.1mm silver-plated copper wires to produce an extremely clear sound with the unique sparkle of silver. *The terminals of the lead wires are designed to be the same diameter as, or slightly tighter than, the terminals of the mounting surface to prevent them from coming loose or making poor contact during playback. If the terminals of these wires are too tight for the terminals of the cartridge or headshell, making installation difficult, please adjust them as needed before use. 【SPECIFICATION】 ●Terminals: Rhodium plated ●Conductor: Hybrid high-purity silver wire ●Cable length: 35mm