SmallRig Z 6III for Nikon Screw QD Cold Shoe Supports Horizontal and Vertical Shooting L-Bracket Arca-Swiss, 1/4-inch-20 Hole, Socket, Mount, (4523)

1. Compatibility: The SmallRig L-plate 4523 is specifically designed for the Nikon Z 6III camera. The L-bracket features a hinged arm for the compartment that rotates outwards, allowing you to fully open the camera door for replacement. In addition, the magnetic double-head screwdriver built into the base plate makes disassembly and installation easy. 2. Cold shoe mount included: Equipped with a cold shoe support block, it stabilizes the camera at two points during vertical shooting, ensuring the frame's center is stable and preventing distortion after the side plates are extended or retracted. 3. Extendable Side Plate: The side plate can be adjusted within a range of 22.5mm when shooting vertically, allowing access to the camera. Extend cables to increase mounting flexibility as needed. Note: If you need access to all ports, extend the side plate first. 4. Quick Switching: The base plate and side plates incorporate quick-release plates for Arca, allowing direct attachment to Arca tripods and stabilizers for DJI RS 2/RSC 2/RS 3/RS 3 Pro/RS4/RS4 Pro, enabling quick switching between stabilizer, tripod, and handheld shooting. 5.3-Point Locking: The L-shaped plate is secured to the camera body via a 1/4-inch-20 screw, positioning pin, and camera strap ring at the bottom, preventing camera flex and shaking. In addition, silicone pads are incorporated into the bottom and side plates to protect the camera body and prevent scratches. 6. Multiple Mounting Points: The L-bracket features multiple interfaces, including a 1/4-inch-20 screw hole, cold shoe, QD socket, and wrist strap slot, allowing you to attach accessories such as QD shoulder straps, microphones, and tripods 3989/4059 to accommodate various shooting scenarios. SmallRig Z 6III L-shaped Mount Plate, Compatible with Nikon - 4523 I. Main features: 1. The base plate and side plates incorporate Arca quick-release plates, allowing them to be directly attached to Arca tripods or DJI RS 2/RSC 2/RS 3/RS 3 Pro/RS4/RS4 Pro stabilizers. 2. The L-shaped plate is secured to the camera body with a 1/4-inch-20 screw at the bottom, a positioning pin, and a camera strap ring, preventing the camera from bending or shaking. 3. The positioning block is equipped with a cold shoe mount, which maintains stability without the side plate deforming during vertical shooting. 4. The side plates are extended by 22.5mm, making vertical cable routing convenient. 5. The versatile built-in interface includes 1/4"-20 screw holes, 3/8"-16 screw holes, QD mount, and wrist/shoulder strap holes to accommodate a variety of shooting scenarios. III. Compatibility Compatible with Nikon Z 6III IV. Included items: L-shaped mounting plate x 1 Positioning block with cold shoe mount x 1 V. Specifications Product dimensions: 147.4 x 64.7 x 90.0 mm / 5.8 x 2.5 x 3.5 inches Package dimensions: 161.0 x 123.0 x 71.5 mm / 6.3 x 4.8 x 2.8 inches Product weight: 132 ± 5.0g / 4.5 ± 0.1 ounces Package weight: 227.0 ± 5.0g / 7.8 ± 0.2 oz Material: Aluminum alloy