LOCTITE High Performance Instant Adhesive 460 Low Odor/Low Whitening 20g

• Quick drying: Short drying time improves workability and reduces production time.

• Suitable for professional use: Also suitable for bonding porous materials (e.g. wood) and acidic surfaces (e.g. galvanized).

• Low odor and low whitening: Almost no irritating odor characteristic of instant adhesives. In addition, since it is a low whitening type, it is ideal for bonding clear parts such as models and areas where the appearance is a concern.

• Versatile: Can be used on hard plastics, synthetic rubber, metals, ceramics, and permeable materials such as wood and cardboard.

• LOCTITE High-performance instant adhesive 460 Low odor, low whitening 20g - For bonding clear parts

LOCTITE High-performance instant adhesive 460 Low odor, low whitening 20g - Highly specialized, professional model A versatile adhesive that can be used to bond hard plastics, synthetic rubber, metals, ceramics, as well as acidic surfaces such as galvanized surfaces and porous materials such as wood. It does not emit a pungent odor even under dry conditions, so it can be used in any work environment. It is ideal for bonding plastic lenses, models, accessories, prisms, and other parts whose appearance is of concern, as there is no whitening phenomenon or clouding of parts near the bonding area. Large capacity (20g) perfect for professional use. *Cannot be bonded to polyethylene, polypropylene, silicone resin, fluororesin, nylon, soft vinyl, glass, or styrofoam. Product Benefits Quick drying Can be used on porous and acidic surfaces Versatile type Low odor and whitening Large capacity (20g) How to use ① Remove dirt and oil from the adhesive surface and dry thoroughly. ②Apply a small amount to one side of the adhesive surface. If you stick them together right away and press them together, they can be glued in seconds to minutes. ③ After use, wipe the nozzle thoroughly, close the cap tightly, and put it in an aluminum bag and seal it. *If the nozzle tip becomes stiff, please use the included pin. Precautions for use: The adhesive surface of leather or cloth may become hard and lose its flexibility. If used on acrylic, polycarbonate, or polystyrene plastics, the plastic may crack or the surface may melt. If the adhesive surface is small (such as eyeglass frames) or plated parts, sufficient adhesive strength may not be obtained. Do not use on precious metals, high-value items, or tableware for eating and drinking.