Matte protective film for SAMSUNG GALAXY M21 hydrogel for the screen matt TPU… Vairāk

MATTE FILM FOR SAMSUNG GALAXY M21 The most important product features: ☑️ Premium class product☑️ Very thin - thickness 0.13 mm☑️ High touch sensitivity☑️ Anti-fingerprint - the film has a matte coating that does not reflect fingerprints☑️ Oleophobic coating - dirt is not so visible☑️ Protection against reflections and UV rays☑️ Absorbs impact energy - provides screen protection and reduces the risk of damage to the display during fall☑️ surface protection against scratches☑️ compatible with cases☑️ easy to install, and any small bubbles will disappear within 24 hours of application The foil has a matte coating that does not reflect fingerprints. ⏹ PROTECTION AGAINST GLARE AND UV RAYSThis is a type of screen protector that reduces glare and light reflections on the phone screen, making it more readable in bright environments or under sunlight. ⏺ ANTISCRASHThe matte film prevents your fingers from slipping on the screen.It protects the entire screen surface from scratches and breakage.The dedicated product is more durable than regular 9H tempered glass. ⏹ LOW VISIBILITYPrecisely cut, hardened matte film.Very thin and flexible, so it adheres perfectly even to rounded smartphone screens. ⏺ VERY EASY INSTALLATIONThe adhesive is covered with tiny glass beads, thanks to which you can move the film on the surface before pressing it. HYDROGEL FILM INSTALLATION INSTRUCTIONS Start by thoroughly cleaning your phone's screen. Use the cloths to remove dust and fingerprints from the display.Use the provided foil by peeling off the cut-out portion and placing it on the screen to check the dimensions and preliminary positioning.Then remove the first bottom layer of the cut-out foil – break it in half (the side that was adhered to the sheet) and proceed to apply the foil carefully.Apply the foil and push any air bubbles outward. Repeat this step several times until all air bubbles are eliminated from the screen.For a curved display, press the edges of the foil around its entire circumference. This step can also be repeated several times.Remove the top layer of the film – it is recommended to use the sticker from the kit.The final step is to gently press the film while wiping the display with the included cloth.Remaining air bubbles will absorb themselves within 24 hours. We recommend not overheating the phone or using a case for the first 2 hours, which will prevent the film from peeling off at the corners of the device. ⏹ PLEASANT TO THE TOUCHThe coating does not affect the operation of the device. Provides a very good tactile experience.The finger print effect is not visible thanks to the properties of the foil. ⏺ INCLUDED:☑️ Matte foil☑️ Application squeegee☑️ Dust-absorber stickers (for removing dust from the screen)☑️ Wet cloth☑️ Microfiber cloth