Spider Fuel Injector FJ503 w/ Retaining Bracket SCPI to MPFIFJ10565 217-3028 12568332 For 96-05 Chevy Chevrolet GMC GM V6 4.3L

Spider Fuel Injector FJ503 w/ Retaining Bracket SCPI to MPFIFJ10565 217-3028 833-22102-6 12568332 For 96-05 Chevy Chevrolet GMC GM V6 4.3L Gas Application: For 96-05 Chevrolet Astro V6 4.3L. For 96-05 Chevrolet Blazer V6 4.3L. For 96-98 Chevrolet C1500 V6 4.3L. For 96-04 Chevrolet Express V6 4.3L. For 96-98 Chevrolet K1500 V6 4.3L. For 96-99 Chevrolet P30 V6 4.3L. For 96-04 Chevrolet S10 V6 4.3L. For 99-04 Chevrolet Silverado V6 4.3L. For 96-98 GMC C1500 V6 4.3L. For 02-96 GMC Jimmy V6 4.3L. For 96-98 GMC K1500 V6 4.3L. For 96-05 GMC Safari V6 4.3L. For 96-04 GMC Savana V6 4.3L. For 99-04 GMC Sierra V6 4.3L. For 96-04 GMC Sonoma V6 4.3L. For 97-00 Isuzu Hombre V6 4.3L. For 96-01 Oldsmobile Bravada V6 4.3L. Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs. OE Number: Fuel Injector: 19210688, 12568332, 88894353. Fuel Injector Motor: 17113273. Replace Manufacture Part Numbers:FJ503, FJ10565, 217-3028, 2173028, 89060439, 833-22102-6, 25331863, 800-1512N, 17113295, 17114164, 17091628. Specification: 100% quality assurance tested, more responsive, less expensive, easier to install. Precisely trimmed solenoid windings enable optimum fuel delivery. High-temp O-rings enable prolonged sealing of injector under extreme heat conditions. Help you attain maximum fuel efficiency and power from your engine. Keep your vehicle performing reliably, efficiently, and safely for many miles to come. Promote smooth engine operation and balanced fuel delivery reducing overall fuel consumption and harmful emissions. Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life. Material & Color: Material: made of high quality ABS Plastic and Metal. Color: as picture. Package Included: 1x Fuel Injector; 1x Retaining Bracket with Bolt.(100% Brand New Never Used Or Installed) Note: Disabling the vehicle’s fuel pump,disconnect the battery Remove the air box system, throttle body, wiring harness connectors and the PCV valve and hose. Remove Upper Intake Manifold cover and SCPI Fuel Meter Body Remove the Fuel Meter Body bracket and replace it with the updated bracket. Insert the MFI Fuel Meter Body into the Fuel Meter Body Bracket on the Lower Intake Manifold. Push down firmly on the fuel meter body locking it into the bracket. Apply a coat of clean motor oil or non-silicone lubricant to the injector tip for easier installation. Insert the number 3 injector into the correct hole in the Lower Intake Manifold first. Install the number 5 injector next and then number 1. This sequence must be followed correctly to prevent interference of the Fuel Tubes. Injectors 2, 4, and 6 are then installed. Temporarily reinstall the Fuel Inlet and Return Lines into the Fuel Meter Body. Reconnect the battery and vehicle’s fuel pump. Perform a Fuel Pressure System check to verify that the injectors are not leaking. If everything is ok, reinstall the Upper Intake Manifold cover and Fuel lines. Installation Instructions: Provide Tracking Number With Every Order, Please Buy With Confidence! No installation guides are included, we highly recommend to seek professional installation. Any damage during installation will not be refunded. Will come with everything you see in the picture. Please allow difference due to manual measurement. Please check that the picture matches before purchase. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. For any inquiries or special requests such as larger amount ordering please write to us.