Firecore 3D Laser Green Laser Full Battery Level 3 Brightness Rotating Laser Green Automatic High High Receiver for Surveying and Includes Magnetic

Achieves high precision of within ±2mm at a distance of 10m. Reliably meets the demands of professionals, from interior finishing to structural marking. Can be easily installed even in narrow spaces such as end partitions in apartment construction sites. Equipped with a green laser that is approximately four times more visible than a red laser. Clearly visible even in direct sunlight. With one horizontal line and two vertical lines projected in all 360° directions, marking of ceilings, floors, and walls can be completed with just one unit. Significantly streamlines marking on site for light steel frame construction, interior renovation, partition construction, etc. Securely attach to steel frames and light steel framing with the powerful magnet on the back. Stable installation on floors and high places with 1/4-inch and 5/8-inch tripods. Furthermore, the magnetic base rotates 360°, so there is no need to move the tripod to fine-tune the laser position, shortening work time. The main unit has a large capacity 4200mAh built-in battery. In low brightness mode, it can be continuously for 20 hours for a full day of work on site (medium brightness mode: 10 hours). It also has a battery level indicator. It can be easily charged with the included USB cable, so it can be powered from a mobile device on site. Securely attach to steel frames and light steel framing with the powerful magnet on the back. Stable installation on floors and high places with 1/4-inch and 5/8-inch tripods. Furthermore, the magnetic base rotates 360°, so there is no need to move the tripod to fine-tune the laser position, shortening work time. The main unit has a large capacity 4200mAh battery built in. In low mode, it can be continuously for a full day of work on site. It also has a battery level indicator. It can be easily charged with the included USB cable, so you can power it from a mobile device on site. Significantly reduces malfunctions caused by dust and water splashes in renovation work and concrete cutting sites. Unlike conventional red lasers, Firecore's green laser level maintains stable output even in low-temperature environments (-10℃). *IP54 is not supported when powered by USB (because the power supply port cover is open). When in operation, the main unit cover is completely closed, so you can use it with peace of mind even in harsh work sites. The measurement range is expanded. By combining it with a dedicated receiver, long-distance projection up to 60m is possible. Even when checking lines on beams at high places or on walls far away, the line position can be easily confirmed by setting the receiver on the staff member and sounding a buzzer. Raising and lowering ladders is reduced, improving safety in complex work sites and significantly increasing work efficiency. The lines reach clearly even in large commercial facilities and outdoor construction work, so you can use it with confidence in any work site. Laser safety standard: Class 2 Output: 1mW or less Laser safety standard: Class 2, output power 1mW or less.