Car Led Roof Light 1210 48 SMD T10 Light Adapter Double-tip Plug Indoor Light Reading Light

Description:

Product name: 48pcs 1210 SMD patch car light board

Color: white light, warm white

Voltage: 12V DC (the output voltage of a general car)

Uses: reading lights, roof lights, trunk lights, room lights, etc.

Instructions for use: Glue stickers are attached to the back for easy fixation (to prevent the lamp board from moving in the lampshade).

LED Qty: 48 5050SMD LEDs

Emitting Color: Pure White

Color temperature: 6000K-6500K

Luminous flux: 240LM

Lifespan: About 30,000-50,000 hours

Dimension: approx. 58mm x 43mm

Performance:

1. Energy saving: 1/10 of the energy consumption of traditional halogen lamps, which can better protect automobile circuits

2. Long life: long service life is 30000-50000 hours

Features:

1. This product can be used for reading lights in the car, trunk lights, etc., DIY as you wish! Can replace 31mm, 36mm, 39mm, 41mm and other length double tip lamps, and can also be equipped with T10 socket, BA9S bayonet connector, directly replace the original car ordinary glass lamp, easy to install.

2. High brightness, strong vibration resistance, low temperature rise, it is a new generation of solid-state light source.

Install:

1. The diameter is the same as that of traditional bulbs, which can be directly replaced with traditional bulbs without the need to modify the circuit.

2. When installing, refer to the product dimensions and pay attention to the size of the installation location. Carefully press and do not squeeze the LED chip to avoid damage.

3. Not suitable for 24V large trucks and buses, please check carefully before installation.

4. The LED has positive and negative poles. If it is not bright, just change the direction (that is, change the electrode).

Packing list:

1 X 48 SMD LED White Panel

1 X T10 Light Adapter

1 X Festoon Dome Light Adapter (with spring)

Note:

The color deviation is subject to actual system configuration and slight dimension difference is allowed due to manual measurement.