Electric Modification Kit Waterproof 22A Controller S866 LCD Electric Bike Conversion Kit for 500W Motor

[Including] This electric modification kit including 22A controller, S866 instrument, 130X thumb throttle, 8C power assist sensor and 1 to 2 connecting line. [Good Ht Dissipation] The controller housing is made of high quality metal with a grooved design, which the internal circuits from thermal overload due to good ht dissipation, to meet your various need. [Waterproof] The LCD instrument is made of high quality ABS material, which is light, strong and , with fine workmanship, good toughness and waterproof performance, providing better for the internal circuit and making it more . Item Type: Electric Bike Conversion Kit Material: Aluminum alloy+ABS plastic Controller Box Size: Approx. 120 x 53 x 32 mm / 4.7 x 2.1 x 1.3 in Instrument Size: Approx. 80 x 48 mm / 3.2 x 1.9 in (manual msurement allowable error) Controller Rated Voltage: 36V/48V Controller imum Current: 22A Controller eed Setting: 1-4.2V Controller Brake Input: Low

: 1:5 Applicable Motor Power: 500W Connector Type: Full waterproof connector Weight: Approx. 640g / 22.6oz Controller Line Definition: 1. Red, black single wire: power wire 2. Black single large wire (9pin): motor wire 3. Black single wire (9pin): 1 To 2 wire 4. Black single wire (3pin): power assist sensor wire 5. Black single wire (2pin): light wire LCD S866 Instrument Working Voltage: 24V, 36V, 48V, 60V compatible (meter NaSelection setting) LCD S866 Instrument Function Description: 1. Di lay function: eed di lay, battery indicator, fault indicator, total mie, single mie 2. Control setting functions: power control, wheel diameter setting, idle eed automatic time setting, backlight brightness setting, startup mode setting, drive mode setting, voltage setting, controller limit value setting 3. Communication protocol: UART Di lay all the contents of the screen (full di lay for 1s after booting) 3.1 Di lay of battery power and remaining power 3.2 Multi-function di lay ar: total mie ODO, single mie TRIP (unit: mile, km), single boot time TIME, battery voltage VOL, DST: battery life 3.3 eed di lay ar

: Average eed, : imum eed, EED: Current eed: unit Mp/h km/h The eed signal is taken from the Hall signal in the motor and sent to the meter by the controller. (The time of a single Hall cycle, unit: 1MS) The instrument will calculate the rl eed according to the wheel diameter and signal data (the number of magnets required by the motor Hall) 3.4 Vehicle power gr adjustment, 0-9 digital di lay and gr bar di lay.