DC 12V 24V PWM Temperature Controlled Fan Regulator 3 Channel Output 4 Wire Chassis Fan Speed Controller With Temperature Probe

Quantity : 1 High-concerned chemical : none Package : SOP is_d : Yes Supply Voltage : DC 12V 24V Type : Module Operating Temperature : 0-70C Origin : Mainland China Condition : New Feature 1 : Fan Speed Controller Feature 2 : 4 Pin PWM Fan Controller Feature 3 : Temperature Controlled Fan Regulator Feature 4 : DC12V 24V Fan Speed Governor Feature 5 : 3 Channel PWM Fan Feature 6 : Thermostatic Fan Controller Feature 7 : DIP Switch Temperature Control Feature 8 : Computer Case Fan Speed Controller Feature 9 : Chassis Cooling Fan Regulator Feature 10 : 4 Wire Fan Temperature Governor

Product Features 1. Supports dual voltage input of DC 12V and 24V, with strong compatibility and peace of mind 2. Three independent four wire outputs, capable of synchronously and intelligently regulating three fans 3. Built in high-precision temperature control module, real-time temperature sensing and automatic speed regulation 4. Simple design, easy wiring, convenient for users to quickly get started and operate 5. The dip switch sets the temperature control threshold, which is intuitive to operate and does not require debugging

Product Introduction This speed controller supports 12V/24V 5A input (current determined by interface current carrying capacity), with one input and three synchronous outputs. It is only compatible with Intel standard 4-wire fans (2/3 wires are not available). Adopting pure PWM signal speed regulation to avoid lagging and abnormal noise caused by power interruption. When the blue wire is connected to the negative pole, it is the minimum speed (about 20%, not turned off)

Product Parameters Working voltage: DC 12V 24V Adjustment method: temperature control and speed regulation Maximum output current: 5A

Instructions for Use The governor is designed to enter the minimum speed at a fixed temperature of around 23 ℃, and the maximum temperature speed is set between 43-70 ℃ through a dip switch; The maximum speed and temperature of the DIP all closed state is 43 ℃, and the fan is continuously variable between 23-43 ℃; Connect the first switch to the 0N position, and the maximum speed temperature is 52 ℃. The fan is continuously variable between 23-52 ℃; Close the first circuit and connect the second circuit. The maximum speed temperature is 61 ℃, and the fan is continuously variable between 23-61 ℃; Both channels are connected, and the maximum speed temperature is 70 ℃. The fan is continuously variable between 23-70 ℃; The default switch for shipment is fully turned off

Packing List Fan speed regulator * 1 Temperature probe * 1 label:yes