Hitec Multiplex Japan Kootai A505 J3 Cub Remote Control Helicopter 3D Mode S-FHSS 2.4GHz 3CH Under 100g No Registration Gift Toy Christmas New Year

[Product Description]

Product Introduction

With a streamlined fuselage design inspired by the J3 CUB, the 'A505 J3-Cub Remote Control' model offers stable flight performance.

● Pre-installed with a Futaba-compatible receiver (S-FHSS compatible). Compatible with Futaba and other transmitters (XK X6) for control. ● Uses three 0720 coreless motors to drive the main propeller with high torque power. ● Constructed with optimized structure and ultra-strong EPP material to reduce damage. ● Features precise centering and high-efficiency 2g digital servos with a response speed of 60°/0.08 sec. ● Equipped with a 6-axis gyroscope for stable, fast, and accurate flight posture. ● Under 100g, so no flight plan notification is required under aviation law, allowing immediate flying enjoyment.

【Basic Specifications】 ○ Flight time: 15–20 minutes ※ ○ Charging time: 90 minutes ○ Control range: 150m ※ ○ Material: EPP ○ Wingspan: 505mm ○ Overall length: 356mm ○ Height: 150mm ○ Weight: approximately 70g ○ Battery: Li-Po 3.7V 500mAh 25C ○ 3CH: Throttle, Rudder, Elevator

【Remote Control Contents】 ○ Aircraft ○ Propeller ○ Front and rear landing gear ○ S-FHSS compatible receiver ○ Li-Po battery ○ USB charging cable ○ Driver ○ Instruction manual

*Product specifications, appearance, and price are subject to change without notice due to product improvements. Flight environment and battery condition may affect performance.

Safety Warnings

Please read carefully: This product is a radio-controlled aircraft with integrated electronic components, not a toy. Although small, it can be dangerous if not handled properly. Always read and understand the instruction manual before use.

Do not use the product for purposes other than intended, disassemble, or modify it, as this may cause unexpected hazards. This product is intended for users aged 15 and above. Use in a safe environment.

This is a consumable that requires advanced operation skills. Disassembly and use may cause parts to wear out. We are not responsible for damages caused by wear, improper assembly, or dangerous operation.

● Pre-installed with a Futaba-compatible receiver (S-FHSS compatible). Control is possible with Futaba and compatible transmitters (XK X6). ● Equipped with a 6-axis gyroscope for stable, high-speed, and precise flight. ● Features 3D mode for stunts such as flips. ● Under 100g, so no flight notification is required under aviation law, allowing immediate flying enjoyment.

[Important Notice - For Overseas Customers]

Thank you for purchasing this product. Before using it overseas, please carefully read the following important notices.

1. Laws, Regulations, and Safety Standards This product complies with Japanese safety standards. Before use in your country, please check its compliance with local laws, regulations, and safety standards. Certain product categories (electronics, cosmetics, food, etc.) may require certification in the importing country.

2. Regarding Electrical Products 【Voltage Compatibility】 When using electrical products, please note that they are designed to match Japanese voltage specifications (90-110V). Using them with a different voltage may cause malfunction.

【Plug Type】 Our products use Japanese plug types (Type A or Type B). Please use a conversion adapter as needed.

【Important Notes Regarding Transformers and Adapters】 Transformers adjust the voltage to match the requirements of the equipment. Conversion adapters only change the plug shape and do not adjust the voltage. Using only a conversion adapter without a transformer may damage the product.

[Regarding Liability] We are not responsible for any malfunctions or damage caused by improper use, such as operating the product without a transformer.

3. Language and Manual Product instructions and displays may be in Japanese only. An English version of the manual can be downloaded from our website.

4. Regarding Product Returns and Exchanges Please note that if you wish to return or exchange a product, you will be required to submit a video of the unpacking process.