Daiei Electric Pipe heater x Immersion heater Boiling water Hot water Insulation Reheating Bucket heater [Nagecom Heater] DA-500L (415mm 55mm)

[Nagecom Daiei Electric Heater] Bucket Heater (Throw-in) DA-500L Accessories: Earth wire, instruction manual [Product Specifications] Voltage: 100V Capacity: 500W Current value: 5A Cord length: Approximately 2m (There may be some errors.) [Product Information] Connection material: Rubber part: CR (chloroprene) Wire material: 2PNCT (2m) + tracking prevention plug [Temperature] Automatic temperature adjustment function: None Dry surface temperature: 600℃ [Precautions for use] Use in a metal bucket to boil water. Be careful when using without water (when using in a place without water). Pulling the cord too hard may cause it to break and cause poor contact, so when lifting it, hold the rubber part. Immersion Heater "Designing the best specifications for our customers" is the new brand from Daiei Denetsu Kogyo. Perfect for winter work sites! "Nagecom" brand product. Just put it in a container and the water will boil using electricity! It can also be used as a disaster prevention item in emergencies. ▼Usage example ・Use at work sites ・Washing a car in the cold winter - Cleaning up after gardening and farm work ・For outdoor gatherings and dining ・Outdoors For interior decoration and wallpapering ▼Industries of use Carpentry, plastering, painting, waterproofing, gardening, agriculture, house cleaning ※Caution for use※ ・This heater is designed for use with water. Do not use with any liquid other than water. - If electricity is applied in the air (dry burning), it will become very hot and may cause a fire. - Never get water into the molded parts (rubber parts) or electrical box. - Always ground the unit via the earth terminal. ▼ Target water temperature and estimated rising time In the case of 500W Amount of water (liters) x temperature rise of water (target water temperature - temperature of water used) ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿× 1.3 = Time (h) 430 In the case of 800W Amount of water (liters) x temperature rise of water (target water temperature - temperature of water used) ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿× 1.3 = Time (h) 688 In the case of 1KW Amount of water (liters) x temperature rise of water (target water temperature - temperature of water used) ＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿＿× 1.3 = Time (h) 860 *This formula is a guideline for when the amount of water is 30 liters or less. If the amount of water exceeds 30 liters, this formula does not apply. *The numbers are for reference only and may vary depending on the ambient temperature, environment, etc.